Wednesday, 15 January 2014

Fixing Sculptures to bases

Today I have been drilling holes in the bottom of the sculptures and into their respective bases. The sculptures have a pin stuck into them that slides into a stainless tube. The stainless tube ensures that the stresses put on the carving by the pin are spread out and generally minimised. Once the sculpture has a pin (or rod) that can be slid in and out, the pin is ready to be glued into the base. The hole drilled in the base is larger than it needs to be so that the sculpture can be made to stand upright before the glue sets. The bits of string that are seen in the picture are holding the sculpture vertical. The paper underneath the carving is stopping the excess glue sticking to the carving. Once the glue is set I will lift off the carving and clean the excess glue from the base.


No comments:

Post a Comment